Real pricing data for motorized screens in Farmingdale, New York, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $9,152. Typical range: $2,040 to $37,516. The average motorized screen measures 13 × 9 ft (width × height), so you can see whether local projects skew small or large — not just what they cost.
Planning a motorized screen project in Farmingdale starts with realistic numbers — not a single quote, but the range of what neighbors across New York have actually paid. We're still building out verified Farmingdale-specific data, so the figures on this page lean on the New York statewide dataset (averaging $9,152), which is a dependable proxy for what Farmingdale homeowners typically pay.
For Farmingdale homes, mounting type — wall, soffit, or roof — and the number of units are the biggest swing factors on the final installed cost. Comparing nearby markets helps sanity-check a quote — see pricing for Sagaponack.
The smartest way to save in Farmingdale is to buy the hardware, fabric, and motor manufacturer-direct and hire a local installer for labor only — that removes the 25–35% product markup an installer would otherwise add.
While we continue to collect local data for Farmingdale, the pricing below reflects 151 verified motorized screen projects across New York. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | New York Statewide | National |
|---|---|---|
| Average Cost | $9,152 | $9,630 |
| Median Cost | $7,804 | $7,590 |
| Price Range | $2,040 – $37,516 | $34 – $117,985 |
| 25th Percentile | $4,877 | $4,378 |
| 75th Percentile | $11,142 | $12,119 |
| Sample Size | 151 projects | 5323 projects |
Homeowners in Farmingdale can expect costs similar to the New York average of $9,152. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $9,152 |
| Average Size (width × height) | 13 × 9 ft |
| Median Cost | $7,804 |
| Low End (25th percentile) | $4,877 |
| High End (75th percentile) | $11,142 |
| Minimum | $2,040 |
| Maximum | $37,516 |
| Sample Size | 151 projects |
| National Average | $9,630 |
| National Median | $7,590 |
Compare motorized screen costs in Farmingdale, New York to state and national averages to understand if local pricing is above, below, or in line with typical costs. Farmingdale, New York average: $9,152. National average: $9,630.
Motorized Screen prices in Farmingdale, New York rank at the 59th percentile nationally — Above Average. National prices range from $34 to $117,985.
Good Time to Buy — Jun prices average 7% below the annual average — a good time to buy.
Best month: Mar (avg $8,506). Peak month: Dec (avg $11,834). Annual average: $9,806.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $10,229 | 165 projects | |
| Feb | $9,131 | 424 projects | |
| Mar | $8,506 | 800 projects | |
| Apr | $10,054 | 1568 projects | |
| May | $10,132 | 621 projects | |
| Jun | $9,161 | 408 projects | Current Month |
| Jul | $10,061 | 293 projects | |
| Aug | $9,444 | 399 projects | |
| Sep | $9,572 | 186 projects | |
| Oct | $8,884 | 215 projects | |
| Nov | $10,668 | 152 projects | |
| Dec | $11,834 | 89 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | New York | National |
|---|---|---|
| Average Installation Cost | $514 | $467 |
| Median Installation Cost | $600 | $525 |
| Installation Range | $200 to $3,000 | $100 to $4,950 |
| Installation as % of Product Cost | 11.7% | 10.7% |
| Data Points | 179 installations | 4626 installations |
Professional installation in New York runs about 10% above the national average, reflecting higher regional labor rates. Based on 179 real installation line items from motorized screen projects in New York.
Based on the Farmingdale, New York average installed price of $9,152, here is a typical cost breakdown for a motorized screen project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,661 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,830 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,373 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,830 |
| Permits, misc. hardware, freight | ~5% | $458 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
New York outdoor-living seasons run from May through September, with humid summers downstate and milder summers upstate. Retractable awnings are common on apartment terraces and suburban decks, with snow load and winter retraction being important considerations.
Based on 151 real projects, the average motorized screen cost in Farmingdale, New York is $9,152, with a median of $7,804. Prices range from $2,040 to $37,516 depending on size, features, and installation complexity.
The average motorized screen in Farmingdale, New York costs $9,152, compared to the national average of $9,630. That puts Farmingdale, New York below the national average. Farmingdale, New York ranks at the 59th percentile nationally.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,506) while Dec is peak season ($11,834). Jun prices average 7% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in New York. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a motorized screen project at the Farmingdale, New York average of $9,152, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.