Real pricing data for motorized screens in Canyon, Texas, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $11,167. Typical range: $710 to $90,530. The average motorized screen measures 12 × 9 ft (width × height), so you can see whether local projects skew small or large — not just what they cost.
If you're pricing a motorized screen for your Canyon home, it helps to see how local projects actually shake out before you call an installer. We're still building out verified Canyon-specific data, so the figures on this page lean on the Texas statewide dataset (averaging $11,167), which is a dependable proxy for what Canyon homeowners typically pay.
Because Texas weather drives much of the value of a motorized screen, prioritize UV-rated fabric or mesh and a wind sensor if your patio is exposed. Comparing nearby markets helps sanity-check a quote — see pricing for Weatherford, Fort Worth, Granbury, Houston.
Canyon buyers consistently save by separating product from labor: order direct, then pay a local pro for installation alone.
While we continue to collect local data for Canyon, the pricing below reflects 642 verified motorized screen projects across Texas. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | Texas Statewide | National |
|---|---|---|
| Average Cost | $11,167 | $9,630 |
| Median Cost | $8,261 | $7,590 |
| Price Range | $710 – $90,530 | $34 – $117,985 |
| 25th Percentile | $4,933 | $4,378 |
| 75th Percentile | $13,038 | $12,119 |
| Sample Size | 642 projects | 5323 projects |
Homeowners in Canyon can expect costs similar to the Texas average of $11,167. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $11,167 |
| Average Size (width × height) | 12 × 9 ft |
| Median Cost | $8,261 |
| Low End (25th percentile) | $4,933 |
| High End (75th percentile) | $13,038 |
| Minimum | $710 |
| Maximum | $90,530 |
| Sample Size | 642 projects |
| National Average | $9,630 |
| National Median | $7,590 |
Compare motorized screen costs in Canyon, Texas to state and national averages to understand if local pricing is above, below, or in line with typical costs. Canyon, Texas average: $11,167. National average: $9,630.
Motorized Screen prices in Canyon, Texas rank at the 71th percentile nationally — Above Average. National prices range from $34 to $117,985.
Good Time to Buy — Jun prices average 7% below the annual average — a good time to buy.
Best month: Mar (avg $8,506). Peak month: Dec (avg $11,834). Annual average: $9,806.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $10,229 | 165 projects | |
| Feb | $9,131 | 424 projects | |
| Mar | $8,506 | 800 projects | |
| Apr | $10,054 | 1568 projects | |
| May | $10,132 | 621 projects | |
| Jun | $9,161 | 408 projects | Current Month |
| Jul | $10,061 | 293 projects | |
| Aug | $9,444 | 399 projects | |
| Sep | $9,572 | 186 projects | |
| Oct | $8,884 | 215 projects | |
| Nov | $10,668 | 152 projects | |
| Dec | $11,834 | 89 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | Texas | National |
|---|---|---|
| Average Installation Cost | $360 | $467 |
| Median Installation Cost | $400 | $525 |
| Installation Range | $100 to $600 | $100 to $4,950 |
| Installation as % of Product Cost | 8.5% | 10.7% |
| Data Points | 131 installations | 4626 installations |
Installation costs in Texas are about 23% below the national average. Based on 131 real installation line items from motorized screen projects in Texas.
Based on the Canyon, Texas average installed price of $11,167, here is a typical cost breakdown for a motorized screen project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $4,467 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $2,233 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,675 |
| Installation labor (mounting, electrical, calibration) | ~20% | $2,233 |
| Permits, misc. hardware, freight | ~5% | $559 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Texas spans three climate zones, but most of the populated corridor sees 200+ sunny days, 95°F+ summer highs, and intense afternoon UV. Patio and pool-deck shade is the #1 home-improvement add-on across Austin, Houston, Dallas, and San Antonio. Motorized screens are commonly used to enclose covered patios for use through July and August, and retractable awnings are popular west-facing on living-room and kitchen windows to cut afternoon heat gain.
Based on 642 real projects, the average motorized screen cost in Canyon, Texas is $11,167, with a median of $8,261. Prices range from $710 to $90,530 depending on size, features, and installation complexity.
The average motorized screen in Canyon, Texas costs $11,167, compared to the national average of $9,630. That puts Canyon, Texas above the national average. Canyon, Texas ranks at the 71th percentile nationally.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,506) while Dec is peak season ($11,834). Jun prices average 7% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in Texas. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a motorized screen project at the Canyon, Texas average of $11,167, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.