Real pricing data for motorized screens in Cedar Hills, Utah, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $7,874. Typical range: $1,668 to $25,303. The average motorized screen measures 9 × 8 ft (width × height), so you can see whether local projects skew small or large — not just what they cost.
If you're pricing a motorized screen for your Cedar Hills home, it helps to see how local projects actually shake out before you call an installer. We're still building out verified Cedar Hills-specific data, so the figures on this page lean on the Utah statewide dataset (averaging $7,874), which is a dependable proxy for what Cedar Hills homeowners typically pay.
In the Cedar Hills area, motor choice (Somfy vs. Dooya) and fabric grade move the price more than almost anything else, so spec those deliberately. Comparing nearby markets helps sanity-check a quote — see pricing for St George, Plain City.
For Cedar Hills projects, buying direct and hiring out only the install is the single biggest lever on total cost.
While we continue to collect local data for Cedar Hills, the pricing below reflects 9 verified motorized screen projects across Utah. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | Utah Statewide | National |
|---|---|---|
| Average Cost | $7,874 | $9,630 |
| Median Cost | $5,093 | $7,590 |
| Price Range | $1,668 – $25,303 | $34 – $117,985 |
| 25th Percentile | $3,832 | $4,378 |
| 75th Percentile | $9,747 | $12,119 |
| Sample Size | 9 projects | 5323 projects |
Homeowners in Cedar Hills can expect costs similar to the Utah average of $7,874. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $7,874 |
| Average Size (width × height) | 9 × 8 ft |
| Median Cost | $5,093 |
| Low End (25th percentile) | $3,832 |
| High End (75th percentile) | $9,747 |
| Minimum | $1,668 |
| Maximum | $25,303 |
| Sample Size | 9 projects |
| National Average | $9,630 |
| National Median | $7,590 |
Compare motorized screen costs in Cedar Hills, Utah to state and national averages to understand if local pricing is above, below, or in line with typical costs. Cedar Hills, Utah average: $7,874. National average: $9,630.
Motorized Screen prices in Cedar Hills, Utah rank at the 52th percentile nationally — Average. National prices range from $34 to $117,985.
Good Time to Buy — Jun prices average 7% below the annual average — a good time to buy.
Best month: Mar (avg $8,506). Peak month: Dec (avg $11,834). Annual average: $9,806.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $10,229 | 165 projects | |
| Feb | $9,131 | 424 projects | |
| Mar | $8,506 | 800 projects | |
| Apr | $10,054 | 1568 projects | |
| May | $10,132 | 621 projects | |
| Jun | $9,161 | 408 projects | Current Month |
| Jul | $10,061 | 293 projects | |
| Aug | $9,444 | 399 projects | |
| Sep | $9,572 | 186 projects | |
| Oct | $8,884 | 215 projects | |
| Nov | $10,668 | 152 projects | |
| Dec | $11,834 | 89 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | Utah | National |
|---|---|---|
| Average Installation Cost | $453 | $467 |
| Median Installation Cost | $509 | $525 |
| Installation Range | $97 to $4,801 | $100 to $4,950 |
| Installation as % of Product Cost | 10.7% | 10.7% |
Installation costs in Utah are about 3% below the national average. Installation estimates are projected from national data adjusted for regional cost-of-living factors.
Based on the Cedar Hills, Utah average installed price of $7,874, here is a typical cost breakdown for a motorized screen project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,150 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,575 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,181 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,575 |
| Permits, misc. hardware, freight | ~5% | $393 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Utah homeowners deal with intense high-altitude UV and dry summer heat. UV-rated solar mesh screens and Sunbrella fabrics are standard, with wind ratings being a particular consideration along the Wasatch Front.
Based on 9 real projects, the average motorized screen cost in Cedar Hills, Utah is $7,874, with a median of $5,093. Prices range from $1,668 to $25,303 depending on size, features, and installation complexity.
The average motorized screen in Cedar Hills, Utah costs $7,874, compared to the national average of $9,630. That puts Cedar Hills, Utah below the national average. Cedar Hills, Utah ranks at the 52th percentile nationally.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,506) while Dec is peak season ($11,834). Jun prices average 7% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in Utah. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a motorized screen project at the Cedar Hills, Utah average of $7,874, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.