Real pricing data for retractable awnings in Belle Glade, Florida, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $6,397. Typical range: $1 to $35,361. The average retractable awning measures 17 × 10 ft (width × projection), so you can see whether local projects skew small or large — not just what they cost.
Planning a retractable awning project in Belle Glade starts with realistic numbers — not a single quote, but the range of what neighbors across Florida have actually paid. We're still building out verified Belle Glade-specific data, so the figures on this page lean on the Florida statewide dataset (averaging $6,397), which is a dependable proxy for what Belle Glade homeowners typically pay.
In the Belle Glade area, motor choice (Somfy vs. Dooya) and fabric grade move the price more than almost anything else, so spec those deliberately. Comparing nearby markets helps sanity-check a quote — see pricing for Miami Beach, Jacksonville, Bradenton, Jupiter.
For Belle Glade projects, buying direct and hiring out only the install is the single biggest lever on total cost.
While we continue to collect local data for Belle Glade, the pricing below reflects 172 verified retractable awning projects across Florida. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | Florida Statewide | National |
|---|---|---|
| Average Cost | $6,397 | $5,374 |
| Median Cost | $5,011 | $4,730 |
| Price Range | $1 – $35,361 | $1 – $42,483 |
| 25th Percentile | $4,119 | $4,119 |
| 75th Percentile | $7,200 | $5,721 |
| Sample Size | 172 projects | 2775 projects |
Homeowners in Belle Glade can expect costs similar to the Florida average of $6,397. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $6,397 |
| Average Size (width × projection) | 17 × 10 ft |
| Median Cost | $5,011 |
| Low End (25th percentile) | $4,119 |
| High End (75th percentile) | $7,200 |
| Minimum | $1 |
| Maximum | $35,361 |
| Sample Size | 172 projects |
| National Average | $5,374 |
| National Median | $4,730 |
Compare retractable awning costs in Belle Glade, Florida to state and national averages to understand if local pricing is above, below, or in line with typical costs. Belle Glade, Florida average: $6,397. National average: $5,374.
Retractable Awning prices in Belle Glade, Florida rank at the 83th percentile nationally — Premium Market. National prices range from $1 to $42,483.
Good Time to Buy — Jun prices average 8% below the annual average — a good time to buy.
Best month: Sep (avg $4,902). Peak month: Dec (avg $6,109). Annual average: $5,360.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $5,718 | 87 projects | |
| Feb | $4,940 | 330 projects | |
| Mar | $5,032 | 407 projects | |
| Apr | $6,061 | 530 projects | |
| May | $5,951 | 340 projects | |
| Jun | $4,942 | 389 projects | Current Month |
| Jul | $4,998 | 236 projects | |
| Aug | $5,530 | 220 projects | |
| Sep | $4,902 | 113 projects | |
| Oct | $5,219 | 37 projects | |
| Nov | $4,912 | 75 projects | |
| Dec | $6,109 | 11 projects |
Save by buying direct — skip the installer markup. Shop Retractable Awnings or build and price your own.
| Metric | Florida | National |
|---|---|---|
| Average Installation Cost | $503 | $520 |
| Median Installation Cost | $525 | $525 |
| Installation Range | $120 to $600 | $1 to $4,000 |
| Installation as % of Product Cost | 9.6% | 10% |
| Data Points | 87 installations | 2029 installations |
Installation costs in Florida are about 3% below the national average. Based on 87 real installation line items from retractable awning projects in Florida.
Based on the Belle Glade, Florida average installed price of $6,397, here is a typical cost breakdown for a retractable awning project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $2,559 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,279 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $960 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,279 |
| Permits, misc. hardware, freight | ~5% | $320 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Florida averages 230+ sunny days per year and high humidity from May through October, with peak UV index readings often above 10. Lanais, screened patios, and pool decks are central to outdoor living, and motorized screens are commonly specified to keep no-see-ums, mosquitoes, and lovebugs out during summer evenings. Retractable awnings extend usable square footage during the rainy season without permanently blocking sun in winter — a critical consideration in a state where snowbird homeowners use their patios year-round.
Based on 172 real projects, the average retractable awning cost in Belle Glade, Florida is $6,397, with a median of $5,011. Prices range from $1 to $35,361 depending on size, features, and installation complexity.
The average retractable awning in Belle Glade, Florida costs $6,397, compared to the national average of $5,374. That puts Belle Glade, Florida above the national average. Belle Glade, Florida ranks at the 83th percentile nationally.
Based on historical pricing data, Sep tends to have the lowest average prices ($4,902) while Dec is peak season ($6,109). Jun prices average 8% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our retractable awnings shop or use the configurator to build and price your own.
Permitting requirements for retractable awnings vary by jurisdiction in Florida. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a retractable awning project at the Belle Glade, Florida average of $6,397, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit retractable awning installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.