Real pricing data for motorized screens in San Clemente, California, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $15,670. Typical range: $14,659 to $16,680. The average motorized screen measures 15 × 9 ft (width × height), so you can see whether local projects skew small or large — not just what they cost.
If you're pricing a motorized screen for your San Clemente home, it helps to see how local projects actually shake out before you call an installer. Local San Clemente project data is still limited, so the most reliable benchmark is the California statewide average of $8,846 — labor rates, permitting, and material costs are broadly consistent across the state, so San Clemente homeowners can expect to land in that range.
In the San Clemente area, motor choice (Somfy vs. Dooya) and fabric grade move the price more than almost anything else, so spec those deliberately. Comparing nearby markets helps sanity-check a quote — see pricing for Ross, Atherton, San Diego, San Marcos.
For San Clemente projects, buying direct and hiring out only the install is the single biggest lever on total cost.
While we continue to collect local data for San Clemente, the pricing below reflects 297 verified motorized screen projects across California. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | California Statewide | National |
|---|---|---|
| Average Cost | $8,846 | $9,618 |
| Median Cost | $7,267 | $7,590 |
| Price Range | $158 – $59,521 | $34 – $117,985 |
| 25th Percentile | $4,346 | $4,378 |
| 75th Percentile | $11,145 | $12,096 |
| Sample Size | 297 projects | 5348 projects |
Homeowners in San Clemente can expect costs similar to the California average of $8,846. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $15,670 |
| Average Size (width × height) | 15 × 9 ft |
| Median Cost | $15,670 |
| Low End (25th percentile) | $14,659 |
| High End (75th percentile) | $16,680 |
| Minimum | $14,659 |
| Maximum | $16,680 |
| Sample Size | 2 projects |
| National Average | $9,618 |
| National Median | $7,590 |
Compare motorized screen costs in San Clemente, California to state and national averages to understand if local pricing is above, below, or in line with typical costs. San Clemente, California average: $15,670. National average: $9,618.
Motorized Screen prices in San Clemente, California rank at the 86th percentile nationally — Premium Market. National prices range from $34 to $117,985.
Average Timing — Jul prices are near the annual average.
Best month: Mar (avg $8,506). Peak month: Dec (avg $11,834). Annual average: $9,795.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $10,229 | 165 projects | |
| Feb | $9,131 | 424 projects | |
| Mar | $8,506 | 800 projects | |
| Apr | $10,054 | 1568 projects | |
| May | $10,132 | 621 projects | |
| Jun | $9,051 | 430 projects | |
| Jul | $10,038 | 296 projects | Current Month |
| Aug | $9,444 | 399 projects | |
| Sep | $9,572 | 186 projects | |
| Oct | $8,884 | 215 projects | |
| Nov | $10,668 | 152 projects | |
| Dec | $11,834 | 89 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | San Clemente, California | National Avg |
|---|---|---|
| Avg. Units per Project | 3 | 2.5 |
| Avg. Cost per Unit | $5,223 | $3,921 |
| Metric | California | National |
|---|---|---|
| Average Installation Cost | $515 | $466 |
| Median Installation Cost | $600 | $500 |
| Installation Range | $200 to $1,100 | $100 to $4,950 |
| Installation as % of Product Cost | 11.9% | 10.7% |
| Data Points | 296 installations | 4656 installations |
Professional installation in California runs about 11% above the national average, reflecting higher regional labor rates. Based on 296 real installation line items from motorized screen projects in California.
Based on the San Clemente, California average installed price of $15,670, here is a typical cost breakdown for a motorized screen project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $6,268 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $3,134 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $2,351 |
| Installation labor (mounting, electrical, calibration) | ~20% | $3,134 |
| Permits, misc. hardware, freight | ~5% | $783 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
California's climate ranges from coastal marine to inland Mediterranean to desert, but most of the state enjoys 250+ sunny days per year and a long outdoor-living season. Coastal homeowners typically prioritize wind-rated retractable awnings and corrosion-resistant hardware, while inland and desert regions favor heavier solar mesh screens and Sunbrella fabrics rated for sustained UV exposure. Title 24 energy compliance also makes exterior shading a frequent retrofit for west-facing glazing.
The pricing data on this page is built from real, anonymized projects. Each row below is a verified motorized screen project with date, scope (number of units), total price, and average cost per unit. This is the raw data behind the city-level averages above.
| Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|
| Apr 2026 | 3-unit | 3 | $16,680 | $5,560 |
| Apr 2026 | 3-unit | 3 | $14,659 | $4,886 |
Project prices reflect the full installed cost including hardware, fabric or mesh, motor, controls, and labor. Single-unit projects typically have higher per-unit costs because of fixed labor, trip, and minimum-charge components — multi-unit projects benefit from shared labor and bulk hardware pricing.
Based on 2 real projects, the average motorized screen cost in San Clemente, California is $15,670, with a median of $15,670. Prices range from $14,659 to $16,680 depending on size, features, and installation complexity.
The average motorized screen in San Clemente, California costs $15,670, compared to the national average of $9,618. That puts San Clemente, California above the national average. San Clemente, California ranks at the 86th percentile nationally.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,506) while Dec is peak season ($11,834). Jul prices are near the annual average.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In San Clemente, California, the average project includes 3 units at $5,223 per unit, compared to the national average of 2.5 units at $3,921 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in California. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a motorized screen project at the San Clemente, California average of $15,670, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.