Pricing guidance for motorized screens in Clinton, Connecticut, drawn from anonymized contractor estimates and manufacturer order data. We have 1 verified local project observed at $2,824, alongside a Connecticut statewide benchmark of $9,736 across 159 projects. No city-local average is claimed. The benchmark average motorized screen measures 12 × 9 ft (width × height), adding scope context to the price data.
The dataset contains one verified Clinton motorized screen project, with estimate-derived product total of $2,824. A sample this small cannot establish a typical Clinton price. Headline comparisons therefore use the Connecticut statewide benchmark of $9,736 across 159 projects.
These are anonymized estimate records, not model quotes. The displayed total covers the matching motorized screen line items in the estimate; installation labor, electrical work, freight, tax, permits, and unrelated products may be separate unless included in those matching lines.
Compare screen quotes at the same opening width and height, then check mesh, motor and control, side-track or zipper system, hood, frame, mount, and quantity. A price for a different opening or retention system is not an apples-to-apples comparison. Ask each seller to itemize the product, selected options, freight, tax, and installation so you can see why totals differ.
For another clearly labeled benchmark, compare Greenwich. Those records are context, not evidence of a Clinton market price.
The 1 verified Clinton project shown on this page remain direct local evidence, but the sample is too small to call a typical city price. The comparison table therefore uses 159 verified motorized screen projects across Connecticut as a broader benchmark, not as measured Clinton pricing.
| Metric | Connecticut Statewide | National |
|---|---|---|
| Average Cost | $9,736 | $10,033 |
| Median Cost | $7,599 | $7,977 |
| Price Range | $179 – $55,713 | $34 – $117,985 |
| 25th Percentile | $4,211 | $4,351 |
| 75th Percentile | $12,608 | $12,903 |
| Sample Size | 159 projects | 6739 projects |
The Connecticut average is $9,736. Use it to frame a budget, then compare the configuration and services in an itemized local quote before drawing a conclusion about a Clinton project.
The aggregate rows below use the Connecticut statewide dataset as a planning proxy; they are not a measured Clinton average.
| Metric | Value |
|---|---|
| Verified Clinton Projects | 1 project |
| Average Size (width × height) | 12 × 9 ft |
| Local Project 1 | $2,824 |
| Connecticut Statewide Average | $9,736 |
| Connecticut Statewide Median | $7,599 |
| Connecticut Sample Size | 159 projects |
| National Average | $10,033 |
| National Median | $7,977 |
Compare the Connecticut statewide motorized screen benchmark with national figures. Connecticut statewide average: $9,736. National average: $10,033. These comparison values are proxies for Clinton, Connecticut, not a measured city average.
The Connecticut statewide motorized screen benchmark ranks at the 60th percentile nationally — Above Average. National prices range from $34 to $117,985.
Average Timing — Oct prices are near the annual average. This chart uses the national seasonal dataset.
Best month: Mar (avg $8,741). Peak month: Jan (avg $12,940). Annual average: $10,465.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $12,940 | 221 projects | |
| Feb | $10,143 | 538 projects | |
| Mar | $8,741 | 945 projects | |
| Apr | $10,131 | 1685 projects | |
| May | $10,475 | 736 projects | |
| Jun | $9,548 | 589 projects | |
| Jul | $10,273 | 500 projects | |
| Aug | $8,931 | 531 projects | |
| Sep | $10,499 | 347 projects | |
| Oct | $10,357 | 329 projects | Current Month |
| Nov | $11,432 | 200 projects | |
| Dec | $12,110 | 115 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | Connecticut | National |
|---|---|---|
| Average Installation Cost | $477 | $458 |
| Median Installation Cost | $525 | $475 |
| Installation Range | $200 to $1,100 | $100 to $4,950 |
| Installation as % of Product Cost | 10.7% | 10.4% |
| Data Points | 131 installations | 4956 installations |
Professional installation in Connecticut runs about 4% above the national average, reflecting higher regional labor rates. Based on 131 real installation line items from motorized screen projects in Connecticut.
This illustrative breakdown applies common category shares to the Connecticut statewide benchmark of $9,736. It is a budgeting model, not a measured Clinton, Connecticut component average. Actual percentages vary with motor brand, fabric grade, freight, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,894 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,947 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,460 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,947 |
| Permits, misc. hardware, freight | ~5% | $488 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
These anonymized estimate records are the local evidence behind this page. Open a project to review its product scope, configuration, and pricing context; exact customer addresses are never disclosed.
| Project | Project Date | Scope | Quantity | Total Price | Size & Configuration |
|---|---|---|---|---|---|
| Motorized Screen project | Apr 2026 | Single line item | 1 | $2,824 | Motorized Screen, qty 1; size 6.4 × 6.9 ft; Mesh: Suntex 90, Hood: White |
Prices reflect the matching product lines in each estimate. Quantities, dimensions, and configurations are shown only when present in the approved public project fields; use the linked case studies to compare scope before comparing totals.
We have 1 verified motorized screen project in Clinton, Connecticut, observed at $2,824. Because that sample is small, aggregate figures use the Connecticut statewide benchmark of $9,736 across 159 projects.
The Connecticut statewide benchmark is $9,736, compared with the national average of $10,033. It is below the national average. This is a budgeting proxy for Clinton, Connecticut, not a measured city average.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,741) while Jan is peak season ($12,940). Oct prices are near the annual average.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in Connecticut. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers may mark up products above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) separates the product price from local installation labor. The Connecticut statewide benchmark on this page is $9,736; compare an itemized local quote before estimating any savings.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.