Pricing guidance for motorized screens in Palm Beach, Florida, drawn from anonymized contractor estimates and manufacturer order data. We have 2 verified local projects observed at $7,164 and $6,070, alongside a Florida statewide benchmark of $10,445 across 490 projects. No city-local average is claimed. The benchmark average motorized screen measures 13 × 9 ft (width × height), adding scope context to the price data.
If you're pricing a motorized screen for your Palm Beach home, it helps to see how local projects actually shake out before you call an installer. Our local evidence currently includes 2 verified Palm Beach projects at $7,164 and $6,070. Because that is a small sample, compare those observations with the Florida statewide benchmark of $10,445 across 490 projects rather than treating them as a typical citywide price.
In the Palm Beach area, motor choice (Somfy vs. Dooya) and fabric grade move the price more than almost anything else, so spec those deliberately. Comparing nearby markets helps sanity-check a quote — see pricing for Miami Beach, Jacksonville, Bradenton, Cocoa.
For a useful comparison, ask for an itemized quote that separates product, freight, options, and installation labor, then compare each component with the labeled benchmark above.
The 2 verified Palm Beach projects shown on this page remain direct local evidence, but the sample is too small to call a typical city price. The comparison table therefore uses 490 verified motorized screen projects across Florida as a broader benchmark, not as measured Palm Beach pricing.
| Metric | Florida Statewide | National |
|---|---|---|
| Average Cost | $10,445 | $10,017 |
| Median Cost | $7,401 | $7,944 |
| Price Range | $330 – $117,985 | $34 – $117,985 |
| 25th Percentile | $3,990 | $4,348 |
| 75th Percentile | $13,507 | $12,884 |
| Sample Size | 490 projects | 6626 projects |
The Florida average is $10,445. Use it to frame a budget, then compare the configuration and services in an itemized local quote before drawing a conclusion about a Palm Beach project.
The aggregate rows below use the Florida statewide dataset as a planning proxy; they are not a measured Palm Beach average.
| Metric | Value |
|---|---|
| Verified Palm Beach Projects | 2 projects |
| Average Size (width × height) | 13 × 9 ft |
| Local Project 1 | $7,164 |
| Local Project 2 | $6,070 |
| Florida Statewide Average | $10,445 |
| Florida Statewide Median | $7,401 |
| Florida Sample Size | 490 projects |
| National Average | $10,017 |
| National Median | $7,944 |
Compare the Florida statewide motorized screen benchmark with national figures. Florida statewide average: $10,445. National average: $10,017. These comparison values are proxies for Palm Beach, Florida, not a measured city average.
The Florida statewide motorized screen benchmark ranks at the 64th percentile nationally — Above Average. National prices range from $34 to $117,985.
Good Time to Buy — Aug prices average 15% below the annual average — a good time to buy. This chart uses the national seasonal dataset.
Best month: Mar (avg $8,725). Peak month: Jan (avg $12,940). Annual average: $10,445.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $12,940 | 221 projects | |
| Feb | $10,143 | 538 projects | |
| Mar | $8,725 | 944 projects | |
| Apr | $10,131 | 1685 projects | |
| May | $10,483 | 735 projects | |
| Jun | $9,548 | 589 projects | |
| Jul | $10,272 | 500 projects | |
| Aug | $8,909 | 518 projects | Current Month |
| Sep | $10,610 | 279 projects | |
| Oct | $10,125 | 300 projects | |
| Nov | $11,338 | 199 projects | |
| Dec | $12,110 | 115 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | Florida | National |
|---|---|---|
| Average Installation Cost | $494 | $460 |
| Median Installation Cost | $525 | $475 |
| Installation Range | $200 to $1,500 | $100 to $4,950 |
| Installation as % of Product Cost | 11.5% | 10.5% |
| Data Points | 142 installations | 4848 installations |
Professional installation in Florida runs about 7% above the national average, reflecting higher regional labor rates. Based on 142 real installation line items from motorized screen projects in Florida.
This illustrative breakdown applies common category shares to the Florida statewide benchmark of $10,445. It is a budgeting model, not a measured Palm Beach, Florida component average. Actual percentages vary with motor brand, fabric grade, freight, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $4,178 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $2,089 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,567 |
| Installation labor (mounting, electrical, calibration) | ~20% | $2,089 |
| Permits, misc. hardware, freight | ~5% | $522 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Florida averages 230+ sunny days per year and high humidity from May through October, with peak UV index readings often above 10. Lanais, screened patios, and pool decks are central to outdoor living, and motorized screens are commonly specified to keep no-see-ums, mosquitoes, and lovebugs out during summer evenings. Retractable awnings extend usable square footage during the rainy season without permanently blocking sun in winter — a critical consideration in a state where snowbird homeowners use their patios year-round.
These anonymized estimate records are the local evidence behind this page. Open a project to review its product scope, configuration, and pricing context; exact customer addresses are never disclosed.
| Project | Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|---|
| Motorized Screen project | Mar 2025 | 2-unit | 2 | $7,164 | $3,582 |
| Motorized Screen project | Feb 2025 | 2-unit | 2 | $6,070 | $3,035 |
Prices reflect the matching product lines in each estimate. They may include different options or services, so use the linked case studies to compare scope before comparing totals.
We have 2 verified motorized screen projects in Palm Beach, Florida, observed at $7,164 and $6,070. Because that sample is small, aggregate figures use the Florida statewide benchmark of $10,445 across 490 projects.
The Florida statewide benchmark is $10,445, compared with the national average of $10,017. It is above the national average. This is a budgeting proxy for Palm Beach, Florida, not a measured city average.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,725) while Jan is peak season ($12,940). Aug prices average 15% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in Florida. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers may mark up products above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) separates the product price from local installation labor. The Florida statewide benchmark on this page is $10,445; compare an itemized local quote before estimating any savings.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.