Real pricing data for motorized screens in Greenland, New Hampshire, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $13,542. Typical range: $13,542 to $13,542. The average motorized screen measures 15 × 10 ft (width × height), so you can see whether local projects skew small or large — not just what they cost.
Planning a motorized screen project in Greenland starts with realistic numbers — not a single quote, but the range of what neighbors across New Hampshire have actually paid. Local Greenland project data is still limited, so the most reliable benchmark is the New Hampshire statewide average of $10,494 — labor rates, permitting, and material costs are broadly consistent across the state, so Greenland homeowners can expect to land in that range.
In the Greenland area, motor choice (Somfy vs. Dooya) and fabric grade move the price more than almost anything else, so spec those deliberately.
For Greenland projects, buying direct and hiring out only the install is the single biggest lever on total cost.
While we continue to collect local data for Greenland, the pricing below reflects 3 verified motorized screen projects across New Hampshire. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | New Hampshire Statewide | National |
|---|---|---|
| Average Cost | $10,494 | $9,615 |
| Median Cost | $13,378 | $7,590 |
| Price Range | $4,561 – $13,542 | $34 – $117,985 |
| 25th Percentile | $4,561 | $4,379 |
| 75th Percentile | $13,542 | $12,076 |
| Sample Size | 3 projects | 5361 projects |
Homeowners in Greenland can expect costs similar to the New Hampshire average of $10,494. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $13,542 |
| Average Size (width × height) | 15 × 10 ft |
| Median Cost | $13,542 |
| Low End (25th percentile) | $13,542 |
| High End (75th percentile) | $13,542 |
| Minimum | $13,542 |
| Maximum | $13,542 |
| Sample Size | 1 projects |
| National Average | $9,615 |
| National Median | $7,590 |
Compare motorized screen costs in Greenland, New Hampshire to state and national averages to understand if local pricing is above, below, or in line with typical costs. Greenland, New Hampshire average: $13,542. National average: $9,615.
Motorized Screen prices in Greenland, New Hampshire rank at the 81th percentile nationally — Premium Market. National prices range from $34 to $117,985.
Average Timing — Jul prices are near the annual average.
Best month: Mar (avg $8,506). Peak month: Dec (avg $11,834). Annual average: $9,788.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $10,229 | 165 projects | |
| Feb | $9,131 | 424 projects | |
| Mar | $8,506 | 800 projects | |
| Apr | $10,054 | 1568 projects | |
| May | $10,132 | 621 projects | |
| Jun | $9,051 | 430 projects | |
| Jul | $9,954 | 309 projects | Current Month |
| Aug | $9,444 | 399 projects | |
| Sep | $9,572 | 186 projects | |
| Oct | $8,884 | 215 projects | |
| Nov | $10,668 | 152 projects | |
| Dec | $11,834 | 89 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | Greenland, New Hampshire | National Avg |
|---|---|---|
| Avg. Units per Project | 3 | 2.5 |
| Avg. Cost per Unit | $4,514 | $3,920 |
| Metric | New Hampshire | National |
|---|---|---|
| Average Installation Cost | $486 | $465 |
| Median Installation Cost | $523 | $500 |
| Installation Range | $105 to $5,177 | $100 to $4,950 |
| Installation as % of Product Cost | 10.7% | 10.7% |
Professional installation in New Hampshire runs about 5% above the national average, reflecting higher regional labor rates. Installation estimates are projected from national data adjusted for regional cost-of-living factors.
Based on the Greenland, New Hampshire average installed price of $13,542, here is a typical cost breakdown for a motorized screen project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $5,417 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $2,708 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $2,031 |
| Installation labor (mounting, electrical, calibration) | ~20% | $2,708 |
| Permits, misc. hardware, freight | ~5% | $678 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
The pricing data on this page is built from real, anonymized projects. Each row below is a verified motorized screen project with date, scope (number of units), total price, and average cost per unit. This is the raw data behind the city-level averages above.
| Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|
| Apr 2026 | 3-unit | 3 | $13,542 | $4,514 |
Project prices reflect the full installed cost including hardware, fabric or mesh, motor, controls, and labor. Single-unit projects typically have higher per-unit costs because of fixed labor, trip, and minimum-charge components — multi-unit projects benefit from shared labor and bulk hardware pricing.
Based on 1 real projects, the average motorized screen cost in Greenland, New Hampshire is $13,542, with a median of $13,542. Prices range from $13,542 to $13,542 depending on size, features, and installation complexity.
The average motorized screen in Greenland, New Hampshire costs $13,542, compared to the national average of $9,615. That puts Greenland, New Hampshire above the national average. Greenland, New Hampshire ranks at the 81th percentile nationally.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,506) while Dec is peak season ($11,834). Jul prices are near the annual average.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In Greenland, New Hampshire, the average project includes 3 units at $4,514 per unit, compared to the national average of 2.5 units at $3,920 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in New Hampshire. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a motorized screen project at the Greenland, New Hampshire average of $13,542, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.