Pricing guidance for motorized screens in Burlington, North Carolina, drawn from anonymized contractor estimates and manufacturer order data. We have 2 verified local projects observed at $330 and $330, alongside a North Carolina statewide benchmark of $9,861 across 505 projects. No city-local average is claimed. The benchmark average motorized screen measures 13 × 9 ft (width × height), adding scope context to the price data.
Planning a motorized screen project in Burlington starts with realistic numbers — not a single quote, but the range of what neighbors across North Carolina have actually paid. Our local evidence currently includes 2 verified Burlington projects at $330 and $330. Because that is a small sample, compare those observations with the North Carolina statewide benchmark of $9,861 across 505 projects rather than treating them as a typical citywide price.
Because North Carolina weather drives much of the value of a motorized screen, prioritize UV-rated fabric or mesh and a wind sensor if your patio is exposed. Comparing nearby markets helps sanity-check a quote — see pricing for Charlotte, Fort Mill, Concord, Mooresville.
For a useful comparison, ask for an itemized quote that separates product, freight, options, and installation labor, then compare each component with the labeled benchmark above.
The 2 verified Burlington projects shown on this page remain direct local evidence, but the sample is too small to call a typical city price. The comparison table therefore uses 505 verified motorized screen projects across North Carolina as a broader benchmark, not as measured Burlington pricing.
| Metric | North Carolina Statewide | National |
|---|---|---|
| Average Cost | $9,861 | $10,017 |
| Median Cost | $7,695 | $7,944 |
| Price Range | $130 – $74,249 | $34 – $117,985 |
| 25th Percentile | $4,157 | $4,348 |
| 75th Percentile | $12,711 | $12,884 |
| Sample Size | 505 projects | 6626 projects |
The North Carolina average is $9,861. Use it to frame a budget, then compare the configuration and services in an itemized local quote before drawing a conclusion about a Burlington project.
The aggregate rows below use the North Carolina statewide dataset as a planning proxy; they are not a measured Burlington average.
| Metric | Value |
|---|---|
| Verified Burlington Projects | 2 projects |
| Average Size (width × height) | 13 × 9 ft |
| Local Project 1 | $330 |
| Local Project 2 | $330 |
| North Carolina Statewide Average | $9,861 |
| North Carolina Statewide Median | $7,695 |
| North Carolina Sample Size | 505 projects |
| National Average | $10,017 |
| National Median | $7,944 |
Compare the North Carolina statewide motorized screen benchmark with national figures. North Carolina statewide average: $9,861. National average: $10,017. These comparison values are proxies for Burlington, North Carolina, not a measured city average.
The North Carolina statewide motorized screen benchmark ranks at the 61th percentile nationally — Above Average. National prices range from $34 to $117,985.
Good Time to Buy — Aug prices average 15% below the annual average — a good time to buy. This chart uses the national seasonal dataset.
Best month: Mar (avg $8,725). Peak month: Jan (avg $12,940). Annual average: $10,445.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $12,940 | 221 projects | |
| Feb | $10,143 | 538 projects | |
| Mar | $8,725 | 944 projects | |
| Apr | $10,131 | 1685 projects | |
| May | $10,483 | 735 projects | |
| Jun | $9,548 | 589 projects | |
| Jul | $10,272 | 500 projects | |
| Aug | $8,909 | 518 projects | Current Month |
| Sep | $10,610 | 279 projects | |
| Oct | $10,125 | 300 projects | |
| Nov | $11,338 | 199 projects | |
| Dec | $12,110 | 115 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | North Carolina | National |
|---|---|---|
| Average Installation Cost | $429 | $460 |
| Median Installation Cost | $425 | $475 |
| Installation Range | $111 to $4,950 | $100 to $4,950 |
| Installation as % of Product Cost | 9.8% | 10.5% |
| Data Points | 429 installations | 4848 installations |
Installation costs in North Carolina are about 7% below the national average. Based on 429 real installation line items from motorized screen projects in North Carolina.
This illustrative breakdown applies common category shares to the North Carolina statewide benchmark of $9,861. It is a budgeting model, not a measured Burlington, North Carolina component average. Actual percentages vary with motor brand, fabric grade, freight, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,944 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,972 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,479 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,972 |
| Permits, misc. hardware, freight | ~5% | $494 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
North Carolina's mix of coastal humidity, Piedmont moderate climate, and mountain elevation means homeowners often spec different products for the same product category. Coastal areas prioritize marine-grade hardware and wind ratings, while inland customers focus on UV-rated fabrics and pollen mesh. Outdoor living seasons stretch from April through October across most of the state.
These anonymized estimate records are the local evidence behind this page. Open a project to review its product scope, configuration, and pricing context; exact customer addresses are never disclosed.
| Project | Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|---|
| Retractable Awning & Motorized Screen project | Mar 2022 | Single-unit | 1 | $330 | $330 |
| Retractable Awning & Motorized Screen project | Mar 2022 | Single-unit | 1 | $330 | $330 |
Prices reflect the matching product lines in each estimate. They may include different options or services, so use the linked case studies to compare scope before comparing totals.
We have 2 verified motorized screen projects in Burlington, North Carolina, observed at $330 and $330. Because that sample is small, aggregate figures use the North Carolina statewide benchmark of $9,861 across 505 projects.
The North Carolina statewide benchmark is $9,861, compared with the national average of $10,017. It is below the national average. This is a budgeting proxy for Burlington, North Carolina, not a measured city average.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,725) while Jan is peak season ($12,940). Aug prices average 15% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in North Carolina. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers may mark up products above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) separates the product price from local installation labor. The North Carolina statewide benchmark on this page is $9,861; compare an itemized local quote before estimating any savings.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.