Real pricing data for motorized screens in Wallace, North Carolina, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $7,626. Typical range: $5,223 to $10,029. The average motorized screen measures 13 × 9 ft (width × height), so you can see whether local projects skew small or large — not just what they cost.
Wallace sits within the broader North Carolina market, where motorized screen pricing is shaped by regional labor rates, climate demands, and how each home is configured. Local Wallace project data is still limited, so the most reliable benchmark is the North Carolina statewide average of $10,021 — labor rates, permitting, and material costs are broadly consistent across the state, so Wallace homeowners can expect to land in that range.
For Wallace homes, mounting type — wall, soffit, or roof — and the number of units are the biggest swing factors on the final installed cost. Comparing nearby markets helps sanity-check a quote — see pricing for Charlotte, Fort Mill, Concord, Huntersville.
The smartest way to save in Wallace is to buy the hardware, fabric, and motor manufacturer-direct and hire a local installer for labor only — that removes the 25–35% product markup an installer would otherwise add.
While we continue to collect local data for Wallace, the pricing below reflects 474 verified motorized screen projects across North Carolina. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | North Carolina Statewide | National |
|---|---|---|
| Average Cost | $10,021 | $9,630 |
| Median Cost | $7,987 | $7,590 |
| Price Range | $1,338 – $74,249 | $34 – $117,985 |
| 25th Percentile | $4,296 | $4,378 |
| 75th Percentile | $12,715 | $12,119 |
| Sample Size | 474 projects | 5323 projects |
Homeowners in Wallace can expect costs similar to the North Carolina average of $10,021. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $7,626 |
| Average Size (width × height) | 13 × 9 ft |
| Median Cost | $7,626 |
| Low End (25th percentile) | $5,223 |
| High End (75th percentile) | $10,029 |
| Minimum | $5,223 |
| Maximum | $10,029 |
| Sample Size | 2 projects |
| National Average | $9,630 |
| National Median | $7,590 |
Compare motorized screen costs in Wallace, North Carolina to state and national averages to understand if local pricing is above, below, or in line with typical costs. Wallace, North Carolina average: $7,626. National average: $9,630.
Motorized Screen prices in Wallace, North Carolina rank at the 50th percentile nationally — Average. National prices range from $34 to $117,985.
Good Time to Buy — Jun prices average 7% below the annual average — a good time to buy.
Best month: Mar (avg $8,506). Peak month: Dec (avg $11,834). Annual average: $9,806.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $10,229 | 165 projects | |
| Feb | $9,131 | 424 projects | |
| Mar | $8,506 | 800 projects | |
| Apr | $10,054 | 1568 projects | |
| May | $10,132 | 621 projects | |
| Jun | $9,161 | 408 projects | Current Month |
| Jul | $10,061 | 293 projects | |
| Aug | $9,444 | 399 projects | |
| Sep | $9,572 | 186 projects | |
| Oct | $8,884 | 215 projects | |
| Nov | $10,668 | 152 projects | |
| Dec | $11,834 | 89 projects |
Save by buying direct — skip the installer markup. Shop Motorized Screens.
| Metric | Wallace, North Carolina | National Avg |
|---|---|---|
| Avg. Units per Project | 1 | 2.5 |
| Avg. Cost per Unit | $7,626 | $3,922 |
| Metric | North Carolina | National |
|---|---|---|
| Average Installation Cost | $429 | $467 |
| Median Installation Cost | $425 | $525 |
| Installation Range | $111 to $4,950 | $100 to $4,950 |
| Installation as % of Product Cost | 9.8% | 10.7% |
| Data Points | 429 installations | 4626 installations |
Installation costs in North Carolina are about 8% below the national average. Based on 429 real installation line items from motorized screen projects in North Carolina.
Based on the Wallace, North Carolina average installed price of $7,626, here is a typical cost breakdown for a motorized screen project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,050 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,525 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,144 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,525 |
| Permits, misc. hardware, freight | ~5% | $382 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
North Carolina's mix of coastal humidity, Piedmont moderate climate, and mountain elevation means homeowners often spec different products for the same product category. Coastal areas prioritize marine-grade hardware and wind ratings, while inland customers focus on UV-rated fabrics and pollen mesh. Outdoor living seasons stretch from April through October across most of the state.
The pricing data on this page is built from real, anonymized projects. Each row below is a verified motorized screen project with date, scope (number of units), total price, and average cost per unit. This is the raw data behind the city-level averages above.
| Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|
| Mar 2024 | Single-unit | 1 | $10,029 | $10,029 |
| Feb 2024 | Single-unit | 1 | $5,223 | $5,223 |
Project prices reflect the full installed cost including hardware, fabric or mesh, motor, controls, and labor. Single-unit projects typically have higher per-unit costs because of fixed labor, trip, and minimum-charge components — multi-unit projects benefit from shared labor and bulk hardware pricing.
Based on 2 real projects, the average motorized screen cost in Wallace, North Carolina is $7,626, with a median of $7,626. Prices range from $5,223 to $10,029 depending on size, features, and installation complexity.
The average motorized screen in Wallace, North Carolina costs $7,626, compared to the national average of $9,630. That puts Wallace, North Carolina below the national average. Wallace, North Carolina ranks at the 50th percentile nationally.
Based on historical pricing data, Mar tends to have the lowest average prices ($8,506) while Dec is peak season ($11,834). Jun prices average 7% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In Wallace, North Carolina, the average project includes 1 units at $7,626 per unit, compared to the national average of 2.5 units at $3,922 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our motorized screens shop or use the configurator to build and price your own.
Permitting requirements for motorized screens vary by jurisdiction in North Carolina. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a motorized screen project at the Wallace, North Carolina average of $7,626, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit motorized screen installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.