Real pricing data for retractable awnings in Florence, Alabama, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $61. Typical range: $61 to $61. The average retractable awning measures 16 × 11 ft (width × projection), so you can see whether local projects skew small or large — not just what they cost.
If you're pricing a retractable awning for your Florence home, it helps to see how local projects actually shake out before you call an installer. Local Florence project data is still limited, so the most reliable benchmark is the Alabama statewide average of $5,045 — labor rates, permitting, and material costs are broadly consistent across the state, so Florence homeowners can expect to land in that range.
For Florence homes, mounting type — wall, soffit, or roof — and the number of units are the biggest swing factors on the final installed cost. Comparing nearby markets helps sanity-check a quote — see pricing for Vestavia Hills.
The smartest way to save in Florence is to buy the hardware, fabric, and motor manufacturer-direct and hire a local installer for labor only — that removes the 25–35% product markup an installer would otherwise add.
While we continue to collect local data for Florence, the pricing below reflects 83 verified retractable awning projects across Alabama. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | Alabama Statewide | National |
|---|---|---|
| Average Cost | $5,045 | $5,363 |
| Median Cost | $4,669 | $4,722 |
| Price Range | $61 – $14,535 | $1 – $42,483 |
| 25th Percentile | $3,980 | $4,119 |
| 75th Percentile | $5,426 | $5,684 |
| Sample Size | 83 projects | 2793 projects |
Homeowners in Florence can expect costs similar to the Alabama average of $5,045. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $61 |
| Average Size (width × projection) | 16 × 11 ft |
| Median Cost | $61 |
| Low End (25th percentile) | $61 |
| High End (75th percentile) | $61 |
| Minimum | $61 |
| Maximum | $61 |
| Sample Size | 1 projects |
| National Average | $5,363 |
| National Median | $4,722 |
Compare retractable awning costs in Florence, Alabama to state and national averages to understand if local pricing is above, below, or in line with typical costs. Florence, Alabama average: $61. National average: $5,363.
Retractable Awning prices in Florence, Alabama rank at the 0th percentile nationally — Below Average. National prices range from $1 to $42,483.
Good Time to Buy — Jul prices average 7% below the annual average — a good time to buy.
Best month: Jun (avg $4,892). Peak month: Dec (avg $6,109). Annual average: $5,354.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $5,718 | 87 projects | |
| Feb | $4,940 | 330 projects | |
| Mar | $5,032 | 407 projects | |
| Apr | $6,061 | 530 projects | |
| May | $5,951 | 340 projects | |
| Jun | $4,892 | 404 projects | |
| Jul | $4,985 | 239 projects | Current Month |
| Aug | $5,530 | 220 projects | |
| Sep | $4,902 | 113 projects | |
| Oct | $5,219 | 37 projects | |
| Nov | $4,912 | 75 projects | |
| Dec | $6,109 | 11 projects |
Save by buying direct — skip the installer markup. Shop Retractable Awnings or build and price your own.
| Metric | Florence, Alabama | National Avg |
|---|---|---|
| Avg. Units per Project | 1 | 1.1 |
| Avg. Cost per Unit | $61 | $4,922 |
| Metric | Alabama | National |
|---|---|---|
| Average Installation Cost | $542 | $518 |
| Median Installation Cost | $525 | $525 |
| Installation Range | $200 to $1,200 | $1 to $4,000 |
| Installation as % of Product Cost | 10.5% | 10% |
| Data Points | 77 installations | 2046 installations |
Professional installation in Alabama runs about 5% above the national average, reflecting higher regional labor rates. Based on 77 real installation line items from retractable awning projects in Alabama.
Based on the Florence, Alabama average installed price of $61, here is a typical cost breakdown for a retractable awning project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $24 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $12 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $9 |
| Installation labor (mounting, electrical, calibration) | ~20% | $12 |
| Permits, misc. hardware, freight | ~5% | $4 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Alabama's hot, humid summers and long outdoor-living season make screened porches and motorized retractable screens a common upgrade. Pollen-rated mesh is a frequent ask in spring, and west-facing retractable awnings are popular on living rooms and kitchens to cut afternoon heat gain.
The pricing data on this page is built from real, anonymized projects. Each row below is a verified retractable awning project with date, scope (number of units), total price, and average cost per unit. This is the raw data behind the city-level averages above.
| Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|
| Apr 2026 | Single-unit | 1 | $61 | $61 |
Project prices reflect the full installed cost including hardware, fabric or mesh, motor, controls, and labor. Single-unit projects typically have higher per-unit costs because of fixed labor, trip, and minimum-charge components — multi-unit projects benefit from shared labor and bulk hardware pricing.
Based on 1 real projects, the average retractable awning cost in Florence, Alabama is $61, with a median of $61. Prices range from $61 to $61 depending on size, features, and installation complexity.
The average retractable awning in Florence, Alabama costs $61, compared to the national average of $5,363. That puts Florence, Alabama below the national average. Florence, Alabama ranks at the 0th percentile nationally.
Based on historical pricing data, Jun tends to have the lowest average prices ($4,892) while Dec is peak season ($6,109). Jul prices average 7% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In Florence, Alabama, the average project includes 1 units at $61 per unit, compared to the national average of 1.1 units at $4,922 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our retractable awnings shop or use the configurator to build and price your own.
Permitting requirements for retractable awnings vary by jurisdiction in Alabama. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a retractable awning project at the Florence, Alabama average of $61, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit retractable awning installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.