Pricing guidance for retractable awnings in Clinton, Connecticut, drawn from anonymized contractor estimates and manufacturer order data. The headline figures use the Clinton, Connecticut local dataset, averaging $7,871. Observed range: $4,555 to $13,777. The benchmark average retractable awning measures 13 × 10 ft (width × projection), adding scope context to the price data.
Clinton sits within the broader Connecticut market, where retractable awning pricing is shaped by regional labor rates, climate demands, and how each home is configured. Across the 6 verified Clinton projects in our data, the average installed retractable awning runs $7,871, with most falling between $5,357 and $9,915.
Because Connecticut weather drives much of the value of a retractable awning, prioritize UV-rated fabric or mesh and a wind sensor if your patio is exposed. Comparing nearby markets helps sanity-check a quote — see pricing for Greenwich.
For a useful comparison, ask for an itemized quote that separates product, freight, options, and installation labor, then compare each component with the labeled benchmark above.
The aggregate rows below use the Clinton, Connecticut local dataset.
| Metric | Value |
|---|---|
| Average Cost | $7,871 |
| Average Size (width × projection) | 13 × 10 ft |
| Median Cost | $6,812 |
| Low End (25th percentile) | $5,357 |
| High End (75th percentile) | $9,915 |
| Minimum | $4,555 |
| Maximum | $13,777 |
| Sample Size | 6 projects |
| National Average | $5,461 |
| National Median | $4,800 |
Compare the Clinton, Connecticut local retractable awning benchmark with state and national figures. Clinton, Connecticut local average: $7,871. National average: $5,461.
The Clinton, Connecticut local retractable awning benchmark ranks at the 87th percentile nationally — Premium Market. National prices range from $1 to $44,000.
Average Timing — Aug prices are near the annual average. This chart uses the national seasonal dataset.
Best month: Nov (avg $5,007). Peak month: Dec (avg $8,469). Annual average: $5,646.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $5,838 | 92 projects | |
| Feb | $5,031 | 340 projects | |
| Mar | $5,348 | 519 projects | |
| Apr | $6,082 | 620 projects | |
| May | $5,743 | 445 projects | |
| Jun | $5,045 | 511 projects | |
| Jul | $5,098 | 356 projects | |
| Aug | $5,565 | 307 projects | Current Month |
| Sep | $5,292 | 144 projects | |
| Oct | $5,230 | 44 projects | |
| Nov | $5,007 | 80 projects | |
| Dec | $8,469 | 14 projects |
Save by buying direct — skip the installer markup. Shop Retractable Awnings or build and price your own.
| Metric | Clinton, Connecticut | National Avg |
|---|---|---|
| Avg. Units per Project | 1.3 | 1.1 |
| Avg. Cost per Unit | $5,904 | $4,890 |
| Metric | Connecticut | National |
|---|---|---|
| Average Installation Cost | $522 | $516 |
| Median Installation Cost | $525 | $525 |
| Installation Range | $200 to $1,500 | $1 to $4,000 |
| Installation as % of Product Cost | 10.3% | 10% |
| Data Points | 72 installations | 2117 installations |
Installation costs in Connecticut are right in line with the national average. Based on 72 real installation line items from retractable awning projects in Connecticut.
This illustrative breakdown applies common category shares to the Clinton, Connecticut local benchmark of $7,871. It is a budgeting model, not a measured Clinton, Connecticut component average. Actual percentages vary with motor brand, fabric grade, freight, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,148 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,574 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,181 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,574 |
| Permits, misc. hardware, freight | ~5% | $394 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Connecticut outdoor-living seasons run from May through September. Retractable awnings are popular on decks and patios for sun and rain protection, with snow load being a winter retraction consideration.
These anonymized estimate records are the local evidence behind this page. Open a project to review its product scope, configuration, and pricing context; exact customer addresses are never disclosed.
| Project | Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|---|
| Retractable Awning project | May 2026 | Single-unit | 1 | $6,812 | $6,812 |
| Retractable Awning project | Apr 2026 | 2-unit | 2 | $9,915 | $4,958 |
| Retractable Awning project | Apr 2026 | Single-unit | 1 | $6,812 | $6,812 |
| Retractable Awning project | Apr 2026 | 2-unit | 2 | $13,777 | $6,889 |
| Retractable Awning project | Apr 2026 | Single-unit | 1 | $5,357 | $5,357 |
| Retractable Awning project | Apr 2026 | Single-unit | 1 | $4,555 | $4,555 |
Prices reflect the matching product lines in each estimate. They may include different options or services, so use the linked case studies to compare scope before comparing totals.
Based on 6 verified projects, the Clinton, Connecticut local average is $7,871, with a median of $6,812. The observed range is $4,555 to $13,777.
The Clinton, Connecticut local benchmark is $7,871, compared with the national average of $5,461. It is above the national average.
Based on historical pricing data, Nov tends to have the lowest average prices ($5,007) while Dec is peak season ($8,469). Aug prices are near the annual average.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In Clinton, Connecticut, the average project includes 1.3 units at $5,904 per unit, compared to the national average of 1.1 units at $4,890 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our retractable awnings shop or use the configurator to build and price your own.
Permitting requirements for retractable awnings vary by jurisdiction in Connecticut. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers may mark up products above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) separates the product price from local installation labor. The Clinton, Connecticut local benchmark on this page is $7,871; compare an itemized local quote before estimating any savings.
Most single-unit retractable awning installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.