Pricing guidance for retractable awnings in Lewiston, Idaho, drawn from anonymized contractor estimates and manufacturer order data. We have 1 verified local project observed at $5,000, alongside a Idaho statewide benchmark of $6,472 across 105 projects. No city-local average is claimed. The benchmark average retractable awning measures 16 × 11 ft (width × projection), adding scope context to the price data.
Homeowners in Lewiston are increasingly adding retractable awnings to extend their usable outdoor season, shade west-facing patios, and cut afternoon cooling costs. Our local evidence currently includes one verified Lewiston project at $5,000. Because that is a small sample, compare those observations with the Idaho statewide benchmark of $6,472 across 105 projects rather than treating them as a typical citywide price.
In the Lewiston area, motor choice (Somfy vs. Dooya) and fabric grade move the price more than almost anything else, so spec those deliberately. Comparing nearby markets helps sanity-check a quote — see pricing for Ketchum, Coeur D Alene, Rathdrum, Hayden.
For a useful comparison, ask for an itemized quote that separates product, freight, options, and installation labor, then compare each component with the labeled benchmark above.
The 1 verified Lewiston project shown on this page remain direct local evidence, but the sample is too small to call a typical city price. The comparison table therefore uses 105 verified retractable awning projects across Idaho as a broader benchmark, not as measured Lewiston pricing.
| Metric | Idaho Statewide | National |
|---|---|---|
| Average Cost | $6,472 | $5,461 |
| Median Cost | $5,270 | $4,800 |
| Price Range | $892 – $25,500 | $1 – $44,000 |
| 25th Percentile | $4,230 | $4,093 |
| 75th Percentile | $8,750 | $5,836 |
| Sample Size | 105 projects | 3472 projects |
The Idaho average is $6,472. Use it to frame a budget, then compare the configuration and services in an itemized local quote before drawing a conclusion about a Lewiston project.
The aggregate rows below use the Idaho statewide dataset as a planning proxy; they are not a measured Lewiston average.
| Metric | Value |
|---|---|
| Verified Lewiston Projects | 1 project |
| Average Size (width × projection) | 16 × 11 ft |
| Local Project 1 | $5,000 |
| Idaho Statewide Average | $6,472 |
| Idaho Statewide Median | $5,270 |
| Idaho Sample Size | 105 projects |
| National Average | $5,461 |
| National Median | $4,800 |
Compare the Idaho statewide retractable awning benchmark with national figures. Idaho statewide average: $6,472. National average: $5,461. These comparison values are proxies for Lewiston, Idaho, not a measured city average.
The Idaho statewide retractable awning benchmark ranks at the 82th percentile nationally — Premium Market. National prices range from $1 to $44,000.
Average Timing — Aug prices are near the annual average. This chart uses the national seasonal dataset.
Best month: Nov (avg $5,007). Peak month: Dec (avg $8,469). Annual average: $5,646.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $5,838 | 92 projects | |
| Feb | $5,031 | 340 projects | |
| Mar | $5,348 | 519 projects | |
| Apr | $6,082 | 620 projects | |
| May | $5,743 | 445 projects | |
| Jun | $5,045 | 511 projects | |
| Jul | $5,098 | 356 projects | |
| Aug | $5,565 | 307 projects | Current Month |
| Sep | $5,292 | 144 projects | |
| Oct | $5,230 | 44 projects | |
| Nov | $5,007 | 80 projects | |
| Dec | $8,469 | 14 projects |
Save by buying direct — skip the installer markup. Shop Retractable Awnings or build and price your own.
| Metric | Idaho | National |
|---|---|---|
| Average Installation Cost | $541 | $516 |
| Median Installation Cost | $525 | $525 |
| Installation Range | $100 to $1,200 | $1 to $4,000 |
| Installation as % of Product Cost | 11.1% | 10% |
| Data Points | 56 installations | 2117 installations |
Professional installation in Idaho runs about 5% above the national average, reflecting higher regional labor rates. Based on 56 real installation line items from retractable awning projects in Idaho.
This illustrative breakdown applies common category shares to the Idaho statewide benchmark of $6,472. It is a budgeting model, not a measured Lewiston, Idaho component average. Actual percentages vary with motor brand, fabric grade, freight, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $2,589 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,294 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $971 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,294 |
| Permits, misc. hardware, freight | ~5% | $324 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
These anonymized estimate records are the local evidence behind this page. Open a project to review its product scope, configuration, and pricing context; exact customer addresses are never disclosed.
| Project | Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|---|
| Retractable Awning project | Feb 2025 | Single-unit | 1 | $5,000 | $5,000 |
Prices reflect the matching product lines in each estimate. They may include different options or services, so use the linked case studies to compare scope before comparing totals.
We have 1 verified retractable awning project in Lewiston, Idaho, observed at $5,000. Because that sample is small, aggregate figures use the Idaho statewide benchmark of $6,472 across 105 projects.
The Idaho statewide benchmark is $6,472, compared with the national average of $5,461. It is above the national average. This is a budgeting proxy for Lewiston, Idaho, not a measured city average.
Based on historical pricing data, Nov tends to have the lowest average prices ($5,007) while Dec is peak season ($8,469). Aug prices are near the annual average.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our retractable awnings shop or use the configurator to build and price your own.
Permitting requirements for retractable awnings vary by jurisdiction in Idaho. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers may mark up products above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) separates the product price from local installation labor. The Idaho statewide benchmark on this page is $6,472; compare an itemized local quote before estimating any savings.
Most single-unit retractable awning installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.