Real pricing data for retractable awnings in Carrollton, Texas, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $3,228. Typical range: $3,228 to $3,228. The average retractable awning measures 16 × 10 ft (width × projection), so you can see whether local projects skew small or large — not just what they cost.
Planning a retractable awning project in Carrollton starts with realistic numbers — not a single quote, but the range of what neighbors across Texas have actually paid. Local Carrollton project data is still limited, so the most reliable benchmark is the Texas statewide average of $5,464 — labor rates, permitting, and material costs are broadly consistent across the state, so Carrollton homeowners can expect to land in that range.
Because Texas weather drives much of the value of a retractable awning, prioritize UV-rated fabric or mesh and a wind sensor if your patio is exposed. Comparing nearby markets helps sanity-check a quote — see pricing for Fort Worth, Austin, Weatherford, Aledo.
Carrollton buyers consistently save by separating product from labor: order direct, then pay a local pro for installation alone.
While we continue to collect local data for Carrollton, the pricing below reflects 137 verified retractable awning projects across Texas. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | Texas Statewide | National |
|---|---|---|
| Average Cost | $5,464 | $5,363 |
| Median Cost | $4,648 | $4,722 |
| Price Range | $1,595 – $19,002 | $1 – $42,483 |
| 25th Percentile | $3,677 | $4,119 |
| 75th Percentile | $6,257 | $5,684 |
| Sample Size | 137 projects | 2793 projects |
Homeowners in Carrollton can expect costs similar to the Texas average of $5,464. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $3,228 |
| Average Size (width × projection) | 16 × 10 ft |
| Median Cost | $3,228 |
| Low End (25th percentile) | $3,228 |
| High End (75th percentile) | $3,228 |
| Minimum | $3,228 |
| Maximum | $3,228 |
| Sample Size | 1 projects |
| National Average | $5,363 |
| National Median | $4,722 |
Compare retractable awning costs in Carrollton, Texas to state and national averages to understand if local pricing is above, below, or in line with typical costs. Carrollton, Texas average: $3,228. National average: $5,363.
Retractable Awning prices in Carrollton, Texas rank at the 6th percentile nationally — Below Average. National prices range from $1 to $42,483.
Good Time to Buy — Jul prices average 7% below the annual average — a good time to buy.
Best month: Jun (avg $4,892). Peak month: Dec (avg $6,109). Annual average: $5,354.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $5,718 | 87 projects | |
| Feb | $4,940 | 330 projects | |
| Mar | $5,032 | 407 projects | |
| Apr | $6,061 | 530 projects | |
| May | $5,951 | 340 projects | |
| Jun | $4,892 | 404 projects | |
| Jul | $4,985 | 239 projects | Current Month |
| Aug | $5,530 | 220 projects | |
| Sep | $4,902 | 113 projects | |
| Oct | $5,219 | 37 projects | |
| Nov | $4,912 | 75 projects | |
| Dec | $6,109 | 11 projects |
Save by buying direct — skip the installer markup. Shop Retractable Awnings or build and price your own.
| Metric | Carrollton, Texas | National Avg |
|---|---|---|
| Avg. Units per Project | 1 | 1.1 |
| Avg. Cost per Unit | $3,228 | $4,922 |
| Metric | Texas | National |
|---|---|---|
| Average Installation Cost | $524 | $518 |
| Median Installation Cost | $500 | $525 |
| Installation Range | $120 to $1,500 | $1 to $4,000 |
| Installation as % of Product Cost | 9.2% | 10% |
| Data Points | 64 installations | 2046 installations |
Installation costs in Texas are right in line with the national average. Based on 64 real installation line items from retractable awning projects in Texas.
Based on the Carrollton, Texas average installed price of $3,228, here is a typical cost breakdown for a retractable awning project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $1,291 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $646 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $484 |
| Installation labor (mounting, electrical, calibration) | ~20% | $646 |
| Permits, misc. hardware, freight | ~5% | $161 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Texas spans three climate zones, but most of the populated corridor sees 200+ sunny days, 95°F+ summer highs, and intense afternoon UV. Patio and pool-deck shade is the #1 home-improvement add-on across Austin, Houston, Dallas, and San Antonio. Motorized screens are commonly used to enclose covered patios for use through July and August, and retractable awnings are popular west-facing on living-room and kitchen windows to cut afternoon heat gain.
The pricing data on this page is built from real, anonymized projects. Each row below is a verified retractable awning project with date, scope (number of units), total price, and average cost per unit. This is the raw data behind the city-level averages above.
| Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|
| Feb 2025 | Single-unit | 1 | $3,228 | $3,228 |
Project prices reflect the full installed cost including hardware, fabric or mesh, motor, controls, and labor. Single-unit projects typically have higher per-unit costs because of fixed labor, trip, and minimum-charge components — multi-unit projects benefit from shared labor and bulk hardware pricing.
Based on 1 real projects, the average retractable awning cost in Carrollton, Texas is $3,228, with a median of $3,228. Prices range from $3,228 to $3,228 depending on size, features, and installation complexity.
The average retractable awning in Carrollton, Texas costs $3,228, compared to the national average of $5,363. That puts Carrollton, Texas below the national average. Carrollton, Texas ranks at the 6th percentile nationally.
Based on historical pricing data, Jun tends to have the lowest average prices ($4,892) while Dec is peak season ($6,109). Jul prices average 7% below the annual average — a good time to buy.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In Carrollton, Texas, the average project includes 1 units at $3,228 per unit, compared to the national average of 1.1 units at $4,922 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our retractable awnings shop or use the configurator to build and price your own.
Permitting requirements for retractable awnings vary by jurisdiction in Texas. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a retractable awning project at the Carrollton, Texas average of $3,228, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit retractable awning installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.