Real pricing data for retractable awnings in Dallas, Texas, drawn from verified contractor estimates and manufacturer order data. Average installed cost: $7,741. Typical range: $3,244 to $12,238. The average retractable awning measures 13 × 11 ft (width × projection), so you can see whether local projects skew small or large — not just what they cost.
Dallas–Fort Worth homeowners face a punishing combination of 100°F+ summer afternoons and violent spring storm season, which makes a motorized retractable awning one of the most practical patio upgrades in North Texas. The metroplex's long outdoor-living season — March through November — means a quality awning pays for itself in usable patio days, shading dining areas and living-room windows from the intense direct sun that drives up cooling bills.
North Texas is also one of the most active severe-weather regions in the country, with spring hail and straight-line wind events. A motorized awning with a wind sensor retracts automatically ahead of a storm, and homeowners who buy the awning direct (then hire a local DFW installer for labor) routinely cut 25–35% off a typical installed quote.
We ship retractable awnings to homeowners across the Dallas metro, including Highland Park, University Park, Lakewood, Plano, Frisco, McKinney, Arlington, Irving, Richardson, and Las Colinas.
While we continue to collect local data for Dallas, the pricing below reflects 134 verified retractable awning projects across Texas. Statewide data provides a reliable baseline since labor rates, material costs, and permitting requirements are generally consistent within the state.
| Metric | Texas Statewide | National |
|---|---|---|
| Average Cost | $5,522 | $5,380 |
| Median Cost | $4,665 | $4,726 |
| Price Range | $1,595 – $19,002 | $1 – $42,483 |
| 25th Percentile | $3,840 | $4,119 |
| 75th Percentile | $6,331 | $5,684 |
| Sample Size | 134 projects | 2698 projects |
Homeowners in Dallas can expect costs similar to the Texas average of $5,522. Actual costs will vary based on the size, motor type, fabric selection, and installation complexity of your specific project.
| Metric | Value |
|---|---|
| Average Cost | $7,741 |
| Average Size (width × projection) | 13 × 11 ft |
| Median Cost | $7,741 |
| Low End (25th percentile) | $3,244 |
| High End (75th percentile) | $12,238 |
| Minimum | $3,244 |
| Maximum | $12,238 |
| Sample Size | 2 projects |
| National Average | $5,380 |
| National Median | $4,726 |
Compare retractable awning costs in Dallas, Texas to state and national averages to understand if local pricing is above, below, or in line with typical costs. Dallas, Texas average: $7,741. National average: $5,380.
Retractable Awning prices in Dallas, Texas rank at the 89th percentile nationally — Premium Market. National prices range from $1 to $42,483.
Peak Season — May is peak season — prices average 12% above the annual average.
Best month: Sep (avg $4,902). Peak month: Dec (avg $6,109). Annual average: $5,362.
| Month | Avg Price | Projects | |
|---|---|---|---|
| Jan | $5,717 | 84 projects | |
| Feb | $4,926 | 324 projects | |
| Mar | $5,015 | 395 projects | |
| Apr | $6,081 | 523 projects | |
| May | $5,998 | 323 projects | Current Month |
| Jun | $4,931 | 357 projects | |
| Jul | $4,998 | 236 projects | |
| Aug | $5,530 | 220 projects | |
| Sep | $4,902 | 113 projects | |
| Oct | $5,219 | 37 projects | |
| Nov | $4,912 | 75 projects | |
| Dec | $6,109 | 11 projects |
Save by buying direct — skip the installer markup. Shop Retractable Awnings or build and price your own.
| Metric | Dallas, Texas | National Avg |
|---|---|---|
| Avg. Units per Project | 1.5 | 1.1 |
| Avg. Cost per Unit | $5,161 | $4,930 |
| Metric | Texas | National |
|---|---|---|
| Average Installation Cost | $524 | $522 |
| Median Installation Cost | $500 | $525 |
| Installation Range | $120 to $1,500 | $1 to $4,000 |
| Installation as % of Product Cost | 9.2% | 10% |
| Data Points | 64 installations | 1968 installations |
Installation costs in Texas are right in line with the national average. Based on 64 real installation line items from retractable awning projects in Texas.
Based on the Dallas, Texas average installed price of $7,741, here is a typical cost breakdown for a retractable awning project. Actual percentages vary with motor brand (Somfy carries a premium over Dooya), fabric grade, and installation complexity.
| Component | Typical Share | Estimated Cost |
|---|---|---|
| Hardware (housing, brackets, end caps, side rails) | ~40% | $3,096 |
| Fabric or mesh (per square foot, UV/insect rated) | ~20% | $1,548 |
| Motor & controls (Somfy / Dooya, remote, wind sensor) | ~15% | $1,161 |
| Installation labor (mounting, electrical, calibration) | ~20% | $1,548 |
| Permits, misc. hardware, freight | ~5% | $388 |
How to save: Buying the hardware, fabric, and motor direct from a manufacturer-direct supplier (and hiring a local installer for labor only) typically removes 25–35% of the installed-by-installer price — that's the markup the installer would otherwise add to the products.
Texas spans three climate zones, but most of the populated corridor sees 200+ sunny days, 95°F+ summer highs, and intense afternoon UV. Patio and pool-deck shade is the #1 home-improvement add-on across Austin, Houston, Dallas, and San Antonio. Motorized screens are commonly used to enclose covered patios for use through July and August, and retractable awnings are popular west-facing on living-room and kitchen windows to cut afternoon heat gain.
The pricing data on this page is built from real, anonymized projects. Each row below is a verified retractable awning project with date, scope (number of units), total price, and average cost per unit. This is the raw data behind the city-level averages above.
| Project Date | Scope | Units | Total Price | Avg / Unit |
|---|---|---|---|---|
| May 2026 | Single-unit | 1 | $3,244 | $3,244 |
| Apr 2026 | 2-unit | 2 | $12,238 | $6,119 |
Project prices reflect the full installed cost including hardware, fabric or mesh, motor, controls, and labor. Single-unit projects typically have higher per-unit costs because of fixed labor, trip, and minimum-charge components — multi-unit projects benefit from shared labor and bulk hardware pricing.
Based on 2 real projects, the average retractable awning cost in Dallas, Texas is $7,741, with a median of $7,741. Prices range from $3,244 to $12,238 depending on size, features, and installation complexity.
The average retractable awning in Dallas, Texas costs $7,741, compared to the national average of $5,380. That puts Dallas, Texas above the national average. Dallas, Texas ranks at the 89th percentile nationally.
Based on historical pricing data, Sep tends to have the lowest average prices ($4,902) while Dec is peak season ($6,109). May is peak season — prices average 12% above the annual average.
Key factors include size and dimensions, motor type (Somfy premium vs standard), fabric or mesh selection, mounting complexity, number of units, and local labor rates. In Dallas, Texas, the average project includes 1.5 units at $5,161 per unit, compared to the national average of 1.1 units at $4,930 per unit.
Yes. Buying direct through our shop eliminates installer markup. You get the same manufacturer-direct products at a lower price, then hire a local installer for labor only. Browse our retractable awnings shop or use the configurator to build and price your own.
Permitting requirements for retractable awnings vary by jurisdiction in Texas. Most retractable, non-structural installations on existing residential structures do not require a permit — but anything that ties into electrical service, modifies a structural wall, or is installed in an HOA-governed community typically does. Check with your local building department before scheduling installation, and request that your installer pull any required permits (rather than pulling them yourself) so the work is warranted under their license.
Local installers typically mark up products 25–40% above wholesale and add labor on top. Buying direct (manufacturer-direct shop or configurator) removes that product markup — you pay the wholesale price, then hire a local installer for labor only. For a retractable awning project at the Dallas, Texas average of $7,741, that often means a 20–30% total project savings while still getting professional installation.
Most single-unit retractable awning installations take 2–4 hours on-site for a qualified installer, plus an initial site visit for measuring. Multi-unit projects can run a half-day to a full day. Lead time from order to installation is typically 3–6 weeks for stocked sizes and colors, and 6–10 weeks for custom sizes or specialty fabrics. Schedule before peak summer if you want to use the product through the current outdoor-living season.